Boomer Pink – 150ml XTR Colours Lexan Spray

<p>Polycarbonate Car Bodies
</p><p>Trim the body and smooth the cut edges with sandpaper.
</p><p>Many polycarbonate shells come with a clear protective film on the outside—don’t peel this off until the paint has completely dried!
</p><p>Cover all areas you don’t want to paint using masking tape or film.
</p><p>Always begin with the darker colors and apply the lighter ones afterward to prevent the darker tones from showing through.
</p><p>Make sure the surface is dry and dust-free before painting.
</p><p>Tips for Best Results
</p><p>Shake the spray can well for about 2 minutes before use, until you hear the mixing ball rattling inside.
</p><p>Hold the can 20–30 cm away from the surface and spray in smooth, overlapping motions.
</p><p>Color coverage may differ slightly between shades.
</p><p>Apply multiple thin coats instead of a single heavy one to avoid paint running. You’ll typically need 2 to 3 coats for full coverage. Wait around 5 minutes between coats.
</p><p>Do not apply a thick layer all at once!
</p><p>Let the paint dry for 5 minutes before peeling off the masking and applying the next layer.
</p><p>After painting, turn the can upside down and spray for 2 seconds to clear the nozzle.
</p><p>Special Notes for Fluorescent Paints
</p><p>Fluorescent shades tend to have less coverage than standard colors. Always apply only light coats.
</p><p>Use fluorescent paints only at temperatures above 15°C (59°F).
</p><p>Spray from a distance of roughly 15 to 20 cm.
</p><p>Allow the fluorescent coat to dry for 30 minutes, then back it with a coat of white XTR Colour.
</p><p>Only then will you achieve the proper fluorescent effect.
</p><p>Contents:
</p><p>150 ml</p><p>
</p><p>
</p><p>
</p><p>
</p><p>
</p><p>
</p>