Python X Brushed/Brushless ESC mit Dynamik 380 FURITEK für 1/0 Crawler

- FOC (Field-Orientated control technology)

- Live tunning on Furicar app

- Super slow and ridiculously smooth throttle control

- New firmware algorithm to consistently smooth up the start up to FOC stage

- Work with Brushed/Brushless motors (config via app, default is brushless)

- Small size and light weight

- Super easy programming via App on both Android and iOS

- Real-time telemetry up to 10Hz

- Bluetooth module controlled by Furicar App included

- Waterproof and dustproof with an enclosing CNC aluminum case

- Over-temperature and max current protection

- AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff.

- FREE lifetime firmware updates

Motor Features

- High low-end torque

- Low KV rating provides more torques at low speeds.

- Efficiency cooling system

- High-quality material with reliable magnets and durable bearings

- High-end CNC aluminum case

- Special designed 12S-14Pole Outrunner brushless motor for high torque output

- Super quiet, high torque, powerful and super slow speed yet tons of wheel speeds when needed

- High purity and higher temperature copper windings -lower copper losses, very good heat dissipating-maximizes efficiency.

- Super thin stator laminations---lower eddy losses---maximizes efficiency. High RPM ABEC5 bearings.

- Precision balanced rotor, smoothness for best reliability, and maximum RPM.

ESC Specifications:

- Supports 2-4S lipo batteries

- Selectable 5.5V/7.5V/8.4V (8A peak) BIG internal BEC (Battery Eliminator Circuit), (config via app)

- Constant current: 80A

- Burst current: 120A

- Removable ON/OF switch

- Dimensions: 1.7x 1x 0.4 (inch), 45x25x10 (mm)

- Weight: 41g (1.4oz)

Motor Specifications:

- Motor type: outrunner

- KV (RPM/V): 2000

- No-load current @7.4V : 3.0A

- Watt: 680W

- Battery: 3-4S lipo

- Resistance: 0.025Ohm

- Max current: 53A

- Slot/Pole: 12S14P

- Motor size: 28.5x38.5mm diameter

- Weight: 91g

Extra requirements:

- The new FURITEK brushless system needs a channel 2 from the receiver to connect to the external ESC. The stock TX/RX does not have a channel 2 so it is required to have a new at least 2-channel TX/RX

MANUAL:

https://drive.google.com/file/d/16UJTUle8vWgEPGKJQfkHDy1t_6WKEqxw/view?usp=sharing